Gkf Clean Type Horizontal Scouring Discharge Centrifuge

Ammonia gas or other inert gases are filled into the main unit. Once the predetermined indicators are met, the main unit starts and automatically increases its speed. When the drum reaches the feeding speed, the feeding valve automatically opens, and the level detection is also activated simultaneously. When the material layer touches the level detection plate, the feeding valve automatically closes, and feeding stops. Under the action of centrifugal force, most of the liquid in the suspension is thrown out through the filter cloth and the holes of the drum. After the material is dried for a certain period of time according to the process requirements, the centrifuge automatically slows down to the washing speed, and the washing valve automatically opens. When the washing liquid reaches a certain thickness, the washing valve automatically closes, and the centrifuge automatically increases its speed to a high speed to further dry the material. Once the material is fully dried, the centrifuge will automatically slow down to the set speed. At this time, the discharge valve opens, the discharge cylinder works, and the scraper rotates upward automatically. The solid material is scraped into the spiral discharge hopper. The material is discharged outside the machine through the valve by the rotation of the screw. When the scraper rises to a certain distance, the block on the scraper device approaches the proximity switch. The scraper stops rising, stays for a period of time, and then quickly retracts. It enters the next cycle.